Copper Mould Tube Specifications
Full specification tables for square, rectangular and round copper mould tubes: cast section, casting machine radius and product length, in millimetres and inches. Standard R4 / R5 / R6 tubes in production are shown with photos. Any section not listed is manufactured to drawing.
Standard Copper Mould Tubes in Production
Five billet-caster specifications produced regularly, each with outer and inner-surface photos. Click through for the full product page.
Square Billet Copper Mould Tube Specifications
Square section 70 × 70 to 200 × 200 mm (2.76 to 7.87 in). Radius and length are ranges; the exact value follows your caster drawing. Inch values are rounded conversions.
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| 70×70 | 2.76×2.76 | R3000–5000 | 118.1–196.9 | L812–850 | 32.0–33.5 |
| 80×80 | 3.15×3.15 | R3000–5000 | 118.1–196.9 | L812–850 | 32.0–33.5 |
| 90×90 | 3.54×3.54 | R3000–6000 | 118.1–236.2 | L812–850 | 32.0–33.5 |
| 100×100 | 3.94×3.94 | R3000–6000 | 118.1–236.2 | L812–900 | 32.0–35.4 |
| 110×110 | 4.33×4.33 | R3000–6000 | 118.1–236.2 | L812–900 | 32.0–35.4 |
| 120×120 | 4.72×4.72 | R4000–8000 | 157.5–315.0 | L800–900 | 31.5–35.4 |
| 130×130 | 5.12×5.12 | R4000–8000 | 157.5–315.0 | L812–900 | 32.0–35.4 |
| 135×135 | 5.31×5.31 | R4000–8000 | 157.5–315.0 | L812–900 | 32.0–35.4 |
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| 140×140 | 5.51×5.51 | R4000–8000 | 157.5–315.0 | L812–900 | 32.0–35.4 |
| 150×150 | 5.91×5.91 | R4000–8000 | 157.5–315.0 | L812–900 | 32.0–35.4 |
| 160×160 | 6.30×6.30 | R6000–9000 | 236.2–354.3 | L812–900 | 32.0–35.4 |
| 175×175 | 6.89×6.89 | R6000–9000 | 236.2–354.3 | L812–900 | 32.0–35.4 |
| 180×180 | 7.09×7.09 | R6000–9000 | 236.2–354.3 | L812–900 | 32.0–35.4 |
| 195×195 | 7.68×7.68 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| 200×200 | 7.87×7.87 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
Rectangular Billet Copper Mould Tube Specifications
Rectangular sections from 120 × 220 up to 150 × 520 mm for bloom and beam-blank casters.
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| 150×140 | 5.91×5.51 | R6000–8000 | 236.2–315.0 | L800–900 | 31.5–35.4 |
| 150×155 | 5.91×6.10 | R6000–8000 | 236.2–315.0 | L800–900 | 31.5–35.4 |
| 180×240 | 7.09×9.45 | R8000–9000 | 315.0–354.3 | L900 | 35.4 |
| 165×225 | 6.50×8.86 | R8000–9000 | 315.0–354.3 | L900 | 35.4 |
| 160×220 | 6.30×8.66 | R6000–9000 | 236.2–354.3 | L900 | 35.4 |
| 120×220 | 4.72×8.66 | R6000–9000 | 236.2–354.3 | L900 | 35.4 |
| 165×280 | 6.50×11.02 | R9000–10000 | 354.3–393.7 | L900 | 35.4 |
| 175×225 | 6.89×8.86 | R6000–9000 | 236.2–354.3 | L900 | 35.4 |
| 130×285 | 5.12×11.22 | R6500–8000 | 255.9–315.0 | L900 | 35.4 |
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| 155×185 | 6.10×7.28 | R6000–8000 | 236.2–315.0 | L900 | 35.4 |
| 140×155 | 5.51×6.10 | R6000–8000 | 236.2–315.0 | L900 | 35.4 |
| 155×165 | 6.10×6.50 | R6000–8000 | 236.2–315.0 | L900 | 35.4 |
| 150×245 | 5.91×9.65 | R6000–8000 | 236.2–315.0 | L900 | 35.4 |
| 165×285 | 6.50×11.22 | R6000–10000 | 236.2–393.7 | L900 | 35.4 |
| 120×225 | 4.72×8.86 | R6000–10000 | 236.2–393.7 | L900 | 35.4 |
| 130×225 | 5.12×8.86 | R6000–10000 | 236.2–393.7 | L900 | 35.4 |
| 150×520 | 5.91×20.47 | R6000–10000 | 236.2–393.7 | L900 | 35.4 |
| 150×490 | 5.91×19.29 | R6000–10000 | 236.2–393.7 | L900 | 35.4 |
Round Billet Copper Mould Tube Specifications
Round section Ø90 to Ø500 mm (3.54 to 19.69 in), radius R3000 to R15000.
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| Ø90 | Ø3.54 | R3000–5000 | 118.1–196.9 | L812–850 | 32.0–33.5 |
| Ø100 | Ø3.94 | R3000–6000 | 118.1–236.2 | L812–850 | 32.0–33.5 |
| Ø105 | Ø4.13 | R5000–6000 | 196.9–236.2 | L812–900 | 32.0–35.4 |
| Ø110 | Ø4.33 | R6000 | 236.2 | L810–900 | 31.9–35.4 |
| Ø120 | Ø4.72 | R5250–8000 | 206.7–315.0 | L812–900 | 32.0–35.4 |
| Ø130 | Ø5.12 | R5250–8000 | 206.7–315.0 | L812–900 | 32.0–35.4 |
| Ø140 | Ø5.51 | R5250–8000 | 206.7–315.0 | L812–900 | 32.0–35.4 |
| Ø150 | Ø5.91 | R5250–8000 | 206.7–315.0 | L812–900 | 32.0–35.4 |
| Ø160 | Ø6.30 | R6000–9000 | 236.2–354.3 | L812–900 | 32.0–35.4 |
| Ø180 | Ø7.09 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø190 | Ø7.48 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø200 | Ø7.87 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Cast sectionmm | Sectioninch | Radius Rmm | Radiusinch | Length Lmm | Lengthinch |
|---|---|---|---|---|---|
| Ø210 | Ø8.27 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø220 | Ø8.66 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø230 | Ø9.06 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø280 | Ø11.02 | R6000–10000 | 236.2–393.7 | L812–900 | 32.0–35.4 |
| Ø310 | Ø12.20 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø320 | Ø12.60 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø330 | Ø12.99 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø340 | Ø13.39 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø350 | Ø13.78 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø400 | Ø15.75 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø450 | Ø17.72 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
| Ø500 | Ø19.69 | R6000–15000 | 236.2–590.6 | L812–900 | 32.0–35.4 |
Note: we accept copper mould tubes of all specifications, including sections not listed above.
Copper Mould Tube Types
General Specifications
| Item | Specification |
|---|---|
| Wall thickness | 8–20 mm (0.31–0.79 in), typically 12 mm (0.47 in) |
| Length | 700–1000 mm (27.6–39.4 in) |
| Casting radius | R3000–R15000 mm (118–591 in) |
| Copper material | TP2 / Cu-DHP, CuAg0.1, CuCrZr |
| Inner surface | Hard chrome 0.08–0.12 mm (0.003–0.005 in), Ni-Cr on request |
| Internal taper | Single, double, multi, parabolic, custom |
| Corner radius | Customized to drawing |
| Water slots | Customized to caster |
| Inspection | CMM report: section, taper, radius, length, plating thickness |
How to Read the Tables
Cast section is the billet size at the mould exit, e.g. 130 × 130 mm. Radius R is the casting machine radius (R6 = R6000 mm); the tube must match it exactly. Length L is the overall tube length; 812 mm (32 in) and 900 mm are the common standards.
Send the marking on your old tube (for example "150×150×900 R6000") or your caster drawing and we confirm taper, wall thickness and plating before quoting.
Request a Quote for Copper Mould Tube
Pick the size from the tables, or send your drawing to sales@coppermouldtube.com or WhatsApp. We quote within one working day.